hey guys,
for some reason the bolts that you use with the square top for tightening are stripped!! how could this happen . what a pain!
thanks..also why can i not find them anywere! waiting to hear back from jet..they are telling me i need to buy a new chuck! makes no sense.
thanks
Help! 4 jaw chuck bolt stripping
-
- Posts: 167
- Joined: Mon Jun 11, 2007 6:20 am
- Location: new jersey
- Contact:
Re: Help! 4 jaw chuck bolt stripping
Overtightening, wrong wrench size, or crappy metal. Usually not too many choices.
Just make sure your wrench fits the new bolts correctly.
Just make sure your wrench fits the new bolts correctly.
Andrew
www.andrewstaplespipes.com
www.andrewstaplespipes.com
-
- Posts: 167
- Joined: Mon Jun 11, 2007 6:20 am
- Location: new jersey
- Contact:
Re: Help! 4 jaw chuck bolt stripping
of coarse its the chuck key that came with it. not sure how could over tighten on the briar
Re: Help! 4 jaw chuck bolt stripping
Unfortunately, that's just what happens with those chucks. They're only good for a limited time. Of course you can switch to the other two, but they'll eventually wear out as well.
-
- Posts: 167
- Joined: Mon Jun 11, 2007 6:20 am
- Location: new jersey
- Contact:
Re: Help! 4 jaw chuck bolt stripping
thanks..i will have to take a pic...jet is actually sending me a new chuck!!!