I saw the other day that according to the manual, I need to drain my compressor daily.
Is that really necessary?
What do you actually need to do routinely, to keep it in good shape?
Compressor maintenance
Re: Compressor maintenance
I drain mine after every use. I had a 1/4 turn valve on the bottom of the tank, after I have finished blasting I open it up while the tank is still full pressure, the rush of air coming out pushes all the water out and dries the tank too so the water is never rusty and I assume the tank is still pretty rust free inside.
Be warned, this method is messy.
Be warned, this method is messy.
Re: Compressor maintenance
It helps if you hold a rag around it to absorb the water for the first few seconds. Seeing as the valve is normally located at the lowest point, you shouldn't have to worry about water remaining due to less pressure or anything.caskwith wrote:I drain mine after every use. I had a 1/4 turn valve on the bottom of the tank, after I have finished blasting I open it up while the tank is still full pressure, the rush of air coming out pushes all the water out and dries the tank too so the water is never rusty and I assume the tank is still pretty rust free inside.
Be warned, this method is messy.
Website: http://www.massispipes.com
Instagram : http://instagram.com/massispipes
Twitter: https://twitter.com/MassisPipes
Facebook: https://facebook.com/MassisPipes
Instagram : http://instagram.com/massispipes
Twitter: https://twitter.com/MassisPipes
Facebook: https://facebook.com/MassisPipes
Re: Compressor maintenance
My compressor is near the door in the dirtiest corner of the shop, I don't care about the messMassis wrote:It helps if you hold a rag around it to absorb the water for the first few seconds. Seeing as the valve is normally located at the lowest point, you shouldn't have to worry about water remaining due to less pressure or anything.caskwith wrote:I drain mine after every use. I had a 1/4 turn valve on the bottom of the tank, after I have finished blasting I open it up while the tank is still full pressure, the rush of air coming out pushes all the water out and dries the tank too so the water is never rusty and I assume the tank is still pretty rust free inside.
Be warned, this method is messy.
- oklahoma red
- Posts: 1084
- Joined: Tue Apr 12, 2011 6:14 pm
Re: Compressor maintenance
If you are not already doing so, switch over to a synthetic compressor oil. Lasts a hell of a lot longer than regular oil.
You can also get an automatic drain for the condensate.
You can also get an automatic drain for the condensate.
Re: Compressor maintenance
Drained it yesterday. The guy who sold it to me must have been a really clean guy, not even a drop came out.
But then it was spotless, I must say.
An automatic drain sounds like a good thing to me!
But then it was spotless, I must say.
An automatic drain sounds like a good thing to me!
Re: Compressor maintenance
I am not so keen on the automatic drains, I have them on my water trap/filters and have had 2 go bad on me.