2012 Pipe In the Hat Trade

For the things that don't fit neatly into the other categories.
Cory
Posts: 189
Joined: Tue May 15, 2012 11:44 pm
Location: Auburn, AL

Re: 2012 Pipe In the Hat Trade

Post by Cory »

Sent you back a PM Jesse. If we can hold off until next Sunday (2/17), I will have one to submit. I have no tools in my apartment and full time internship doesn't allow much time to make the trek to my parent's house to work on pipes.

Sorry guys! I completely understand if you want to move on without me.
The way to make people want to smoke your pipes is to develop a reputation for excellence in your work. This takes a lot of hard work and several years to accomplish, and there are no short cuts. You just have to keep at it. - Rad Davis
User avatar
Ocelot55
Posts: 1639
Joined: Thu Nov 10, 2011 12:31 pm
Location: Columbus, OH
Contact:

Re: 2012 Pipe In the Hat Trade

Post by Ocelot55 »

So what we will do, unless there are any objections, is to include Cory's name in the drawing. The people he is next to on the list will need to coordinate with Cory when he gets his entry finished. If for some reason Cory doesn't get done, we will just remove his name from the list and proceed as normal.

Still haven't heard from Leus and mightysmurf281, but I think everyone is ready for the list.

Question to the participants: should we include them for now and go ahead and make the list?
the rev
Posts: 737
Joined: Wed Oct 01, 2008 1:42 pm
Location: long beach CA
Contact:

Re: 2012 Pipe In the Hat Trade

Post by the rev »

When is the last time we heard from either of them?

rev
"but rev, isn't smoking a sin?"

well I suppose if one were to smoke to excess it would be a sin

"but what would be smoking to excess?"

Why smoking two pipes at once of course
User avatar
Ocelot55
Posts: 1639
Joined: Thu Nov 10, 2011 12:31 pm
Location: Columbus, OH
Contact:

Re: 2012 Pipe In the Hat Trade

Post by Ocelot55 »

the rev wrote:When is the last time we heard from either of them?

rev
Last time Leus was logged in was Feb. 4.
Last time mightysmurf logged in was Jan. 25.
User avatar
Ocelot55
Posts: 1639
Joined: Thu Nov 10, 2011 12:31 pm
Location: Columbus, OH
Contact:

Re: 2012 Pipe In the Hat Trade

Post by Ocelot55 »

Ok folks. Had lots of pm messages. Looks like we'll be comprising the list of folks that we've heard from.

We've had a pretty strong turnout and I'd personally like to thank everyone who participated.

So without further ado!

THE OFFICIAL 2012 PIPE IN THE HAT EXCHANGE LIST

1.Massis
2.Christian (Tarock Briar)(two pipes; choose one)
3.the rev
4.scotties22
5.JonBood
6.Walle (two pipes; choose one)
7.UberHuberMan
8.D Marshall
9.WCannoy
10.Ocelot55
11.bandkbrooks
12.taharris
13.mredmond
14.Cory
15.cmueller
16.heri
17.MonsieurLabo
18.fuchi_jeg
19.Vermont Freehand
20.eric
21.Gershom
22.Brewmaster


This list was composed by using http://www.random.org

To quote Kurt in previous trades:
As with previous trades, you send your pipe to the person below you, and the last person on the list sends theirs to the first. Send each other a PM to arrange for shipment.

Most of all, use this as an opportunity to get and give honest and constructive feedback regarding your pipes. Nothing is quite as helpful and detailed as hands-on feedback.
Special notes:
1.For those sending a pipe to Christian Tarock or recieving one from him, rev will be your contact. Please PM rev for details.
2. If you haven't been included because of lack of contact and would like to be (by that I mean have a pipe that is done or close to done) please pm me and we'll put you in.
Last edited by Ocelot55 on Mon Feb 11, 2013 9:37 am, edited 1 time in total.
Brewmaster
Posts: 9
Joined: Sat Mar 17, 2012 12:58 pm
Location: Lebanon, Oregon

Re: 2012 Pipe In the Hat Trade

Post by Brewmaster »

So this seems like it should be a very simple thing to do. Send your pipe to the person below you and the last person(which i am) sends to the first. The one thing that is making me stop and ask is the two sets of numbers next to each name. We are using the first set of numbers correct? I am assuming the second set was left over from the before. So my pipe goes to Massis and i will be receiving one from Gershom. Sorry to ask but i just want to get this right.
Massis
Posts: 938
Joined: Thu Aug 26, 2010 9:05 am

Re: 2012 Pipe In the Hat Trade

Post by Massis »

Was wondering the same thing Brewmaster, but I signed up 2nd and rev first, so yeah, those are the numbers from the original list.

I'm getting the cheaters pipe (j/k! looking forward to it!) and sending mine to Christian.
Rev & Brew, I'll pm you later tonight (for reference it's 7.30 am here now)
User avatar
Walle
Posts: 234
Joined: Sat Dec 23, 2006 5:45 pm
Location: Germany
Contact:

Re: 2012 Pipe In the Hat Trade

Post by Walle »

Hurrah!


Image

Hopefullx all mine pretty soon.
(You know: In comparison the distance between Sweden and Germany is really short :D )

Cheerio!
Walle
Pipes That Make You Smile
www.blue-lobster-pipes.com
User avatar
Ocelot55
Posts: 1639
Joined: Thu Nov 10, 2011 12:31 pm
Location: Columbus, OH
Contact:

Re: 2012 Pipe In the Hat Trade

Post by Ocelot55 »

Brewmaster wrote:So this seems like it should be a very simple thing to do. Send your pipe to the person below you and the last person(which i am) sends to the first. The one thing that is making me stop and ask is the two sets of numbers next to each name. We are using the first set of numbers correct? I am assuming the second set was left over from the before. So my pipe goes to Massis and i will be receiving one from Gershom. Sorry to ask but i just want to get this right.

I just deleted that second set of numbers. Hopefully that makes things a bit more clear. Sorry about the confusion!
User avatar
d.huber
Posts: 2691
Joined: Mon Dec 12, 2011 9:28 pm
Location: Durham, NC
Contact:

Re: 2012 Pipe In the Hat Trade

Post by d.huber »

Yay! The list!

Watch out, Walle. I will not be gentle.

I mean, seriously. How am I supposed to offer critique on one of Walle's pipes? "Do this more better?" :lol:

Well I'm totally excited. I can't wait to send off my pipe. :)

Edit: or enjoy my new Wallenstein. :D
Last edited by d.huber on Mon Feb 11, 2013 9:59 am, edited 1 time in total.
http://www.dshpipes.com

"Strive for excellence, not for what someone else accepts."
-Tyler Beard
User avatar
d.huber
Posts: 2691
Joined: Mon Dec 12, 2011 9:28 pm
Location: Durham, NC
Contact:

Re: 2012 Pipe In the Hat Trade

Post by d.huber »

PMs sent to Walle and D Marshall.
http://www.dshpipes.com

"Strive for excellence, not for what someone else accepts."
-Tyler Beard
the rev
Posts: 737
Joined: Wed Oct 01, 2008 1:42 pm
Location: long beach CA
Contact:

Re: 2012 Pipe In the Hat Trade

Post by the rev »

bwahahahahaha Scottie gets Scottie.

So you can always be reminded of your pregasoraus ways. I will send this out tomorrow, I need the get the pipe bag finished. Please try not to be as mean spirited and petty when you critique my pipe as you are in normal everyday life. I am a fragile little thing.

selfishly I am very happy, I get to give my pipe to you. I hope you enjoy it. And I am not sure anyone here, cept maybe Walle, loves Christian's pipes as much as I do. Very happy.

rev
"but rev, isn't smoking a sin?"

well I suppose if one were to smoke to excess it would be a sin

"but what would be smoking to excess?"

Why smoking two pipes at once of course
scotties22
Posts: 1767
Joined: Mon Jun 11, 2012 9:43 pm
Location: Missouri
Contact:

Re: 2012 Pipe In the Hat Trade

Post by scotties22 »

My husband started rolling on the floor he was laughing so hard when I showed him the list. I knew that I would get your pipe and have been prepaired (HAHAHAHA) for it. How flattering to have a pipe made in your honor and then have the ability to add it to your collection!! :lol:

All jesting aside......I will do nothing but give honest feedback :twisted: ..................or will I??
Am I Calamity Jane or Annie Oakley??...depends on the day.
www.ladybriar.com
Massis
Posts: 938
Joined: Thu Aug 26, 2010 9:05 am

Re: 2012 Pipe In the Hat Trade

Post by Massis »

I didn't really know Christian before this PITH, but his pipes are amazing. I'm quite sure you're not the only one who loves them!

I hope he'll love mine as much :-P

PMs sent to Rev and Brewmaster.
cmueller
Posts: 133
Joined: Sun Jul 10, 2011 9:55 pm

Re: 2012 Pipe In the Hat Trade

Post by cmueller »

PMs sent to Cory and Heri.
Gershom
Posts: 241
Joined: Sat Feb 25, 2012 10:40 pm
Location: Columbia, SC USA
Contact:

Re: 2012 Pipe In the Hat Trade

Post by Gershom »

PM to Brewmaster.
Cory
Posts: 189
Joined: Tue May 15, 2012 11:44 pm
Location: Auburn, AL

Re: 2012 Pipe In the Hat Trade

Post by Cory »

PM sent to mredmond and responded to Craig!

I will post pictures here when I get mine done. Hopefully it will go smoothly :roll:...
The way to make people want to smoke your pipes is to develop a reputation for excellence in your work. This takes a lot of hard work and several years to accomplish, and there are no short cuts. You just have to keep at it. - Rad Davis
Gershom
Posts: 241
Joined: Sat Feb 25, 2012 10:40 pm
Location: Columbia, SC USA
Contact:

Re: 2012 Pipe In the Hat Trade

Post by Gershom »

Eric, I got your pipe and PMed you.
User avatar
d.huber
Posts: 2691
Joined: Mon Dec 12, 2011 9:28 pm
Location: Durham, NC
Contact:

Re: 2012 Pipe In the Hat Trade

Post by d.huber »

Haven't heard from D Marshall. Sent another PM to touch base.
http://www.dshpipes.com

"Strive for excellence, not for what someone else accepts."
-Tyler Beard
mredmond
Site Supporter
Posts: 420
Joined: Tue Jun 30, 2009 11:53 pm
Location: Florida

Re: 2012 Pipe In the Hat Trade

Post by mredmond »

I'm a little late posting pictures, but here's one. The angle is a little funny, my button is the same height on top and bottom, but it doesn't look like it in this picture. There are some things I think could be better, but it ought to smoke decently. Independently, I ended up doing a similar drilling as Walt. It's a sort of cavalier meets system meets calabash type thing. I figured if you're going to do some weird drilling, do some weird drilling. The draw is still good, despite the weirdness, and all the extra holes make for an easy clench despite it's relative rotundness.

Image

Micah
Post Reply