finishing the slot
finishing the slot
Hi all, what do you all use to clean the inside of the slot after final fileing so the inside of the slot does'nt look brown. The buffer does'nt get in there thanx Bob Clark
"I never knew how empty was my soul untill it was filled" Arthur
http://www.clarkpipes.com
http://www.clarkpipes.com
- Tyler
- Site Supporter
- Posts: 2376
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Farmersville, TX
- Contact:
Re: finishing the slot
Melt some buffing compound and get it on a pipe cleaner.
Tyler Lane Pipes
http://www.tylerlanepipes.com
http://www.tylerlanepipes.com
Re: finishing the slot
That's what I do also.Tyler wrote:Melt some buffing compound and get it on a pipe cleaner.
Re: finishing the slot
I use a cotton shoestring loaded with buffing compound.
Rad
Rad
Re: finishing the slot
I take a pipecleaner thats been pulled over the tripoli, then spin it through the stem.
Re: finishing the slot
I tell my kids "If that isn't shiny inside when I come back, I'ma spank yer asses." and I don't know what they do, but it sure looks good.
ALL YOUR PIPE ARE BELONG TO US!
Re: finishing the slot
Olive oil... just go easy.
Re: finishing the slot
Geeez. You only have them polish eh? I have them make the whole pipe . Course I got 4 kids so I had to find something for them to do other than destroy the house during the winter .Sasquatch wrote:I tell my kids "If that isn't shiny inside when I come back, I'ma spank yer asses." and I don't know what they do, but it sure looks good.
Andrew
www.andrewstaplespipes.com
www.andrewstaplespipes.com
Re: finishing the slot
rub the pipe cleaner on some tripoli, then chuck it in a dremel.
Kim Kendall
http://www.PenguinBriar.com/
http://www.PenguinBriar.com/
Re: finishing the slot
Hi Bob,
I'm using also a pipe cleaner with buffering compound and I use a drill:
Machine runs not too fast. You can use a complete pipe cleaner for polish the complete airhole (makes the cleaner happy! And easier to clean later.)
Use protective glasses!
Greetings from Graz
Peter
I'm using also a pipe cleaner with buffering compound and I use a drill:
Machine runs not too fast. You can use a complete pipe cleaner for polish the complete airhole (makes the cleaner happy! And easier to clean later.)
Use protective glasses!
Greetings from Graz
Peter
Pipe-Blog: http://daskunstportal.at/artofbriar/
Drawing-Blog: http://daskunstportal.at/8bar/
Forum: http://www.daskunstportal.at/pipemaker/index.php
Drawing-Blog: http://daskunstportal.at/8bar/
Forum: http://www.daskunstportal.at/pipemaker/index.php
Re: finishing the slot
Comrade Pereu,
that is a fantastic solution with a wonderful result!
Best,
Abi
that is a fantastic solution with a wonderful result!
Best,
Abi