I never thought of us all sporting this up in Chicago. That would be cool! The idea of a blue print is growing on me. But the "pipe anatomy" ties into an idea I've had for a pipe so you all may be inadvertantly advertising for me!jeff wrote:How about a blueprint style image of a pipe, but perhaps in a Gray's Anatomy kind of style, you know, like da Vinci's image of the guy w/ arms outstretched. And something simple underneath like, "Pipe Anatomy" or something better. Let's get a move on this though. We might be able to have them by Chicago of this year instead of 2010.
Jeff
Pipe Making T-Shirts
I think it should be an image with that statue of the guy thinking (i think it is called the "Thinker" :dunno: ....the one where the guy is sitting and resting his head on his hand). Anyway the shirt could have that statue with a pipe in his mouth and at the bottom it could read "The Sophisticated Smoker" :thumb:
or
It could be a big fat naked bearded guy standing puffing on a pipe and at the bottom it could read "The Burly Smoke"
or
It could be a big fat naked bearded guy standing puffing on a pipe and at the bottom it could read "The Burly Smoke"
off the peg stems: be off!
Off off the peg stems.
Turn your own tenons!
Off the peg stems: be off!
I turn my own tenons.
As probably most amateur (and many pro?) pipemakers I started out with working a kit. However, it wasn’t until I hand cut my first stem that I really felt like making a pipe / my pipe.
The process of cutting one’s own stems is, to me, indicative of “real pipe making”: the stem is an important physical link in any pipe construction and stem work a critical factor in its success. Indeed, because of that, the stem cutting process bears almost philosophical significance to me:
“Real freedom” in pipemaking comes only with cutting ones own stems. Until one starts doing his/her own stemwork, proper pipe construction / design is always subject to constraints other than what in the last 30 years or so (the emergence of the Danish “paradigm”?) has become a fundamental characteristic of a well crafted pipe: a holistic pipe design / construction based on the consideration of (block) grain in order to bring forth its full (and hopefully unique) beauty. To construct / design a pipe in this manner, whilst properly integrating the stem in terms of both flow and functional characteristics, one can hardly do without hand cutting stems.
In essence thus, to me, hand cutting ones own stems, not only “separates the men from the boys” but also bears reference to a mode of pipe production I think most of us here prefer: “true”, self-reliant, from the scratch, free, low yield / high quality pipemaking where the block, heart and mind are the only dictates.
p.s. english is my second language. I, therefore, hope no unwanted double entendres (other than the deliberate peg / tenon & off / off) have slipped in there without my notice…
...and, of course, any less poetic / more direct (and understandable?) variation of the theme by a native speaker shall be more than welcome!
Turn your own tenons!
Off the peg stems: be off!
I turn my own tenons.
As probably most amateur (and many pro?) pipemakers I started out with working a kit. However, it wasn’t until I hand cut my first stem that I really felt like making a pipe / my pipe.
The process of cutting one’s own stems is, to me, indicative of “real pipe making”: the stem is an important physical link in any pipe construction and stem work a critical factor in its success. Indeed, because of that, the stem cutting process bears almost philosophical significance to me:
“Real freedom” in pipemaking comes only with cutting ones own stems. Until one starts doing his/her own stemwork, proper pipe construction / design is always subject to constraints other than what in the last 30 years or so (the emergence of the Danish “paradigm”?) has become a fundamental characteristic of a well crafted pipe: a holistic pipe design / construction based on the consideration of (block) grain in order to bring forth its full (and hopefully unique) beauty. To construct / design a pipe in this manner, whilst properly integrating the stem in terms of both flow and functional characteristics, one can hardly do without hand cutting stems.
In essence thus, to me, hand cutting ones own stems, not only “separates the men from the boys” but also bears reference to a mode of pipe production I think most of us here prefer: “true”, self-reliant, from the scratch, free, low yield / high quality pipemaking where the block, heart and mind are the only dictates.
p.s. english is my second language. I, therefore, hope no unwanted double entendres (other than the deliberate peg / tenon & off / off) have slipped in there without my notice…
...and, of course, any less poetic / more direct (and understandable?) variation of the theme by a native speaker shall be more than welcome!
I really like jeffs idea of the da vinci model.
Maybe a sketch of a pipe in a similar style as Da Vinci's sketchbook drawings.
Maybe a sketch of a pipe in a similar style as Da Vinci's sketchbook drawings.
Last edited by ArtGuy on Fri Mar 18, 2005 1:59 pm, edited 1 time in total.
John
www.crosbypipes.com
www.crosbypipes.com
I went ahead and did a quickie 3 minute sketch of a pipe just to see what you guys thought of having something with this sort of drawing style on the shirt. This could be cleaned up in areas and such but anyhow.....
We could come up with some sort of logo or slogan to go over the top and bottom perhaps or something. I envision it going along with some sort of text. Perhaps a group of sketches on the same page maybe? I dunno, I just thought I would throw it out there.
We could come up with some sort of logo or slogan to go over the top and bottom perhaps or something. I envision it going along with some sort of text. Perhaps a group of sketches on the same page maybe? I dunno, I just thought I would throw it out there.
Last edited by ArtGuy on Sat Mar 26, 2005 5:46 pm, edited 1 time in total.
John
www.crosbypipes.com
www.crosbypipes.com
How about a small band of inages that run horz. below the main image area. Or across the shoulders in back:
Like the well known Evolution of Man progression from monkey (or earlier) to upright Homospns.
it could go like-
Bush (Erica Aborea), burl, block, rough sawn shape, finished shape,
and finally pipe in smiling mans' mouth w/ wisp of smoke.
It could all be done in solid color silhouette style.
I can whip this out it a few minutes in PS.
I think most folks are clueless and a bit fascinated when they find out the progression a pipe makes.
If there is real interest in this, I'll be glad to create it and send it to the appropriate person (s).
Like the well known Evolution of Man progression from monkey (or earlier) to upright Homospns.
it could go like-
Bush (Erica Aborea), burl, block, rough sawn shape, finished shape,
and finally pipe in smiling mans' mouth w/ wisp of smoke.
It could all be done in solid color silhouette style.
I can whip this out it a few minutes in PS.
I think most folks are clueless and a bit fascinated when they find out the progression a pipe makes.
If there is real interest in this, I'll be glad to create it and send it to the appropriate person (s).
- Tyler
- Site Supporter
- Posts: 2376
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Farmersville, TX
- Contact:
Great idea Steve! If you want to whip something up as a rough draft, I'd love to see it. John is also working something up. Maybe we could incorporate the two, or perhaps just offer a choice of two designs.
Tyler Lane Pipes
http://www.tylerlanepipes.com
http://www.tylerlanepipes.com
quite repeating yourself! We heard you the first time... geeze!
I don't use measurements either (not in the drawings that is)... I just thought that the intent would be more clear. If people see your t-shirt and then later get upset that you are not using measurements on your drawings you can send them to me! :thumb:
I don't use measurements either (not in the drawings that is)... I just thought that the intent would be more clear. If people see your t-shirt and then later get upset that you are not using measurements on your drawings you can send them to me! :thumb:
- achduliebe
- Posts: 729
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/South Carolina
- Contact:
Todd...hmmm....oh yeah, wait he ascended to the ranks of the stinky changers! I am sure he is spending his fair share of time performing parental chores.
-Bryan
"You should never fight, but if you have to fight...fight dirty. Kick 'em in the groin, throw a rock at 'em"
www.quinnpipes.com
"You should never fight, but if you have to fight...fight dirty. Kick 'em in the groin, throw a rock at 'em"
www.quinnpipes.com
- ToddJohnson
- Posts: 1366
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Nashville, TN
- Contact: