Ugly Betty...

Want to show you work to the world? Want a place to post photos of your work and solicit the opinions of those that have gone before you? Post your work here.
Post Reply
User avatar
ND Pipes
Posts: 812
Joined: Fri Jul 16, 2010 7:21 am
Contact:

Ugly Betty...

Post by ND Pipes »

This pipe was made to be a working pipe... even if it seems that a smoker will have problems to hold it, it is very nice to hold in hand probably due to sides that are slightly "bent towards the tobacco chamber" (don't know how to say it differently).... also, the pipes does not have any carnauba on it, only brown tripoli and it would not be hard to find few markings from sanding paper on it (i am talking about the rim of the tobacco chamber) - so please have that in mind... it is a little workhorse... and experiment in shape that is very nice to hold and i hope to smoke too...
the pipe looks kind of old and used and that is exactly what my intention was... to make a new pipe with not so classic shape that will look used and "with experience"...
enjoy...

Image

Image

Image

Image

Image

Image

Image

Image
"URTEILE NICHT ÜBER DINGE, VON DENEN DU NUR ECHO UND SCHATTEN KENNST !"

http://tnd-pipes.com/
User avatar
Sasquatch
Posts: 5147
Joined: Tue Jan 13, 2009 1:46 am

Re: Ugly Betty...

Post by Sasquatch »

I think that looks pretty cool.
ALL YOUR PIPE ARE BELONG TO US!
User avatar
ND Pipes
Posts: 812
Joined: Fri Jul 16, 2010 7:21 am
Contact:

Re: Ugly Betty...

Post by ND Pipes »

thank you Sas... this means a lot to me especially as I know you like classic shapes.... :) thank you :)
"URTEILE NICHT ÜBER DINGE, VON DENEN DU NUR ECHO UND SCHATTEN KENNST !"

http://tnd-pipes.com/
caskwith
Posts: 2196
Joined: Sat Dec 08, 2007 6:00 am

Re: Ugly Betty...

Post by caskwith »

I like it! :)
smokindawg
Posts: 417
Joined: Thu Nov 23, 2006 8:00 pm
Location: Missouri
Contact:

Re: Ugly Betty...

Post by smokindawg »

Nice one....... It's good to stray from the typical once in a while.

That's one I'd smoke and enjoy myself.
Pipe Maker in the Making!
Charl
Posts: 1901
Joined: Mon Jan 07, 2008 3:03 pm
Location: South Africa

Re: Ugly Betty...

Post by Charl »

Another Walle in the making? :roll:
Nice one! :lol:
User avatar
DaGamba
Posts: 213
Joined: Thu Feb 04, 2010 10:28 am
Location: Wernigerode, Sachsen-Anhalt, Germany

Re: Ugly Betty...

Post by DaGamba »

I really like this pipe. And the partial rustication is very fitting. And sitting on my favorite tobacco as well.... :D
User avatar
ND Pipes
Posts: 812
Joined: Fri Jul 16, 2010 7:21 am
Contact:

Re: Ugly Betty...

Post by ND Pipes »

thanks for replies... :) much appreciated ....
Walle - oh yes.. he is my inspiration from the very beggining... i am stil going from left to right, searching to express myself... :)
DaGamba wrote:I really like this pipe. And the partial rustication is very fitting. And sitting on my favorite tobacco as well.... :D
talking about tobacco - this stuff is strong ... really strong :) :) :) but gooooooooooooddddd!!!! :P heheheheheheh
"URTEILE NICHT ÜBER DINGE, VON DENEN DU NUR ECHO UND SCHATTEN KENNST !"

http://tnd-pipes.com/
User avatar
Nate
Posts: 1455
Joined: Sun Aug 29, 2010 1:07 am
Location: Indianapolis, IN

Re: Ugly Betty...

Post by Nate »

Nice work Daniel! Unique shape with interesting details all over it. The concave sides should indeed make it nice to hold. I like the rustication you used on it, seems to fit well with the design.
User avatar
maxmil
Posts: 833
Joined: Sun Dec 12, 2010 5:46 pm
Location: La Coruña - Galicia - Spain
Contact:

Re: Ugly Betty...

Post by maxmil »

A very original.
Greetings.
Felix

Un trabajo muy original.
Saludos.
Félix
qtmaster
Posts: 7
Joined: Sat Jan 15, 2011 9:52 am
Location: Hawk Pride, Alabama

Re: Ugly Betty...

Post by qtmaster »

Nice work, I like the detailing on the stem.
Life, Liberty and the Pursuit of Happiness.
User avatar
ND Pipes
Posts: 812
Joined: Fri Jul 16, 2010 7:21 am
Contact:

Re: Ugly Betty...

Post by ND Pipes »

thank You guys...
best regards
daniel
"URTEILE NICHT ÜBER DINGE, VON DENEN DU NUR ECHO UND SCHATTEN KENNST !"

http://tnd-pipes.com/
User avatar
Abi Natur
Posts: 401
Joined: Sat Feb 20, 2010 7:45 am
Location: Montenegro- Bar
Contact:

Re: Ugly Betty...

Post by Abi Natur »

Hey Danijel,
could i imagine this pipe in a sci-fi movie - Absolutely! It is a spice pipe for 'Dune the Desert Planet" by David Lynch .
So many different elements submerge in this shape that it is a walk on a border line and you still managed to sustain this fragile equilibrium.

May the force be with you Image
Abi
" Keep it simple until it gets complicated "

http://www.canaanpipes.com/
User avatar
ND Pipes
Posts: 812
Joined: Fri Jul 16, 2010 7:21 am
Contact:

Re: Ugly Betty...

Post by ND Pipes »

Abi, my friend... this answer you just posted strikes me like a lightning...
believe it or not, just today i was thinking about the same book serial/movie from F. Herbert... i read the whole serial several years ago and this left a deep mark in me... it has something very mistic, something very close to me and very deep in there ..... and just today i was thinking of a pipe ... a very special pipe ...........
...
"URTEILE NICHT ÜBER DINGE, VON DENEN DU NUR ECHO UND SCHATTEN KENNST !"

http://tnd-pipes.com/
User avatar
ND Pipes
Posts: 812
Joined: Fri Jul 16, 2010 7:21 am
Contact:

Re: Ugly Betty...

Post by ND Pipes »

Abi Natur wrote:Hey Danijel,
could i imagine this pipe in a sci-fi movie - Absolutely! It is a spice pipe for 'Dune the Desert Planet" by David Lynch .
So many different elements submerge in this shape that it is a walk on a border line and you still managed to sustain this fragile equilibrium.

May the force be with you Image
Abi

Abi - bas sam danas dobio ideju o jednoj luli... vrlo posebnoj luli... Shai Hulud luli... mozes li zamisliti koliko sam se iznenadio kada sam vidio tvoj komentar o Ugly Betty... Abi, moj respekt... duboko me dirnulo.... hvala!!!
"URTEILE NICHT ÜBER DINGE, VON DENEN DU NUR ECHO UND SCHATTEN KENNST !"

http://tnd-pipes.com/
User avatar
Walle
Posts: 234
Joined: Sat Dec 23, 2006 5:45 pm
Location: Germany
Contact:

Re: Ugly Betty...

Post by Walle »

tNd wrote:

Abi - bas sam danas dobio ideju o jednoj luli... vrlo posebnoj luli... Shai Hulud luli... mozes li zamisliti koliko sam se iznenadio kada sam vidio tvoj komentar o Ugly Betty... Abi, moj respekt... duboko me dirnulo.... hvala!!!
So, und jetzt das Ganze nochmal auf deutsch, bitte!

Daniel,

I waited quite a long time to make my comment ....
Well. You learned a lot. Your skill is amazing. This pipe is not ugly at all.

But:

Betty is just overloaded.
Too many frills, too many details.
Betty´s tits are just too big.
They frighten me.

Cheerio!
Walle
Pipes That Make You Smile
www.blue-lobster-pipes.com
User avatar
ND Pipes
Posts: 812
Joined: Fri Jul 16, 2010 7:21 am
Contact:

Re: Ugly Betty...

Post by ND Pipes »

guys - i am soooo sorry... this had to be a private message to Abi.... OMG... sorry guys - i really thought i was writing a message .. now i see my mistake.... :)
...
since it got out - the message was about Abi's comment about F. Herbert Dune serial of books and 'Dune the Desert Planet" by David Lynch... i was telling him that i was just today thinking about one very special pipe that found an inspiration in Dune serial... i was thinking to make a Shai-Hulud... a sandworm... (i did not want to make this public until it is done but it got out - have some issues with the shape to solve).....my big mouth :)
....
"URTEILE NICHT ÜBER DINGE, VON DENEN DU NUR ECHO UND SCHATTEN KENNST !"

http://tnd-pipes.com/
User avatar
ND Pipes
Posts: 812
Joined: Fri Jul 16, 2010 7:21 am
Contact:

Re: Ugly Betty...

Post by ND Pipes »

Walle wrote:
Daniel,

I waited quite a long time to make my comment ....
Well. You learned a lot. Your skill is amazing. This pipe is not ugly at all.

But:

Betty is just overloaded.
Too many frills, too many details.
Betty´s tits are just too big.
They frighten me.

Cheerio!
Walle
Walle, thank You for your comment... i am happy you like it in a way - this means a lot to me... i hope that it is clear that your work was an inspiration here... and i have to give you my respect in that manner too.....

yes... i have to work this shape arround few more times to make it better and better... it has few issues that need to be made differently and it will be very very nice... :)....
it is a very good shape to use when working with small briar blocks... it uses the material to the maximum... :)
"URTEILE NICHT ÜBER DINGE, VON DENEN DU NUR ECHO UND SCHATTEN KENNST !"

http://tnd-pipes.com/
Post Reply