Howdy folks! This is my first time posting, but I've been lurking in the shadows for a bit. I've read over my options when it comes to fitting stems to pipes. Unfortunately, right now, money is a little tight, as is time (baby on the way, due date is less than 2 weeks away). I'm just looking to finish one last pipe before I turn into a baby-changing zombie. I'd love to try Delrin, but getting the material and trying it out is going to require more attention than I have right now. I've tried hand filing the tenon on my stem, but it's near impossible to keep the face of the stem and the tenon perpindicular and reduce the tenon evenly. To finish this long winded story, I've arrived at the conclusion that a tenon reducing tool is the best bet for the time being. I was just wondering if anyone might have a used one that I might buy off them.
Thanks for the help.
Looking for a PIMO Tenon tool
Looking for a PIMO Tenon tool
"Why a four year old child could understand this... Run out and find me a four year old child -I can't make head or tail out of it!" -Groucho Marx
Re: Looking for a PIMO Tenon tool
Tim West at JH Lowe has delrin tenons already made in various sizes. Give him a call to see if he has what you need.
Don
Don
Don
Re: Looking for a PIMO Tenon tool
Thanks hammer! I'll definitely look into that... wonder if the wife will be angry with more pipe stuff coming in the mail. I guess there's only one way to find out.
"Why a four year old child could understand this... Run out and find me a four year old child -I can't make head or tail out of it!" -Groucho Marx
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
Re: Looking for a PIMO Tenon tool
'Tis better to ask forgiveness than permission....
At least it worked for those nail guns I recently bought.
At least it worked for those nail guns I recently bought.
Re: Looking for a PIMO Tenon tool
I think my Parish priest was the first one to tell me that.'Tis better to ask forgiveness than permission....
Unfortunately, it looks like they JH Lowe doesn't sell Delrin rod in the size I need (1/2"). Thanks for the idea though. Hmmm... any other suggestions?
"Why a four year old child could understand this... Run out and find me a four year old child -I can't make head or tail out of it!" -Groucho Marx
- staffwalker
- Site Supporter
- Posts: 391
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: USA, texas
Re: Looking for a PIMO Tenon tool
Online Metals, fast, cheap, no min order, all sizes of Delrin. bob
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
Re: Looking for a PIMO Tenon tool
Believe it or not, I've recently been using tenons of 7/16" and 1/2" for a lot of pipes. They're great for thick-shanked pipes with drilling arrangements that would otherwise be impossible with a smaller tenon. There's a post on the forum somewhere where Todd talks about using large mortises and tenons to accommodate strange drilling, so I took that idea and ran with it.caskwith wrote:1/2" is a big tenon! lol
Re: Looking for a PIMO Tenon tool
Yeah i can imagine it is useful for specialist drilling etc or for a very large pipe. I repaired a pipe for someone at our club and that was 10mm so not too far off really. I guess im just conditioned by the fact that i like small pipes with small shanks, i pretty much exclusivly use 6mm delrin as it allows me to make very small pencil shanked pipes yet still maintain good wall thickness on the mortice. I guess i could branch out a bit in future lol.KurtHuhn wrote:Believe it or not, I've recently been using tenons of 7/16" and 1/2" for a lot of pipes. They're great for thick-shanked pipes with drilling arrangements that would otherwise be impossible with a smaller tenon. There's a post on the forum somewhere where Todd talks about using large mortises and tenons to accommodate strange drilling, so I took that idea and ran with it.caskwith wrote:1/2" is a big tenon! lol