I thought I would note some carving lessons that I'm learning the hard way thus far in the journey and would appreciate any tips from the pros here.
1. Better to wreck a block of ebauchon then a more expensive block of plateaux
2. Measure 1143 times and drill once
3. Round off sharp corners to aid in turning without chipping
4. Sharp tools save blocks
5. Always take off a little less rather than a little more = less regret from getting greedy with the sander or turning tools
6. I'm gonna need more blocks
7. Don't force the stem and crack the shank... file it some more ( note: see number 5 before filing )
8. Don't drill the airway too far and across the chamber (note: see number 2 before drilling )
9. Drill the airway and chamber first. If there are any defects inside the chamber such as pitting, you will have wasted all that carving time.
10. I'm gonna need just one more tool, and maybe another after that
My Carving Lessons thus far
-
- Posts: 123
- Joined: Tue Jan 16, 2018 8:10 pm
My Carving Lessons thus far
Last edited by Bluesytone on Fri Jan 26, 2018 10:45 am, edited 1 time in total.
my mouth is the marketing department for the circus in my head
- sandahlpipe
- Posts: 2106
- Joined: Mon Feb 04, 2013 8:49 pm
- Location: Zimmerman, MN
- Contact:
Re: My Carving Lessons thus far
Fail early and fail often.
Re: My Carving Lessons thus far
I'm going to take these all to heart!!!
- oklahoma red
- Posts: 1084
- Joined: Tue Apr 12, 2011 6:14 pm
Re: My Carving Lessons thus far
Tools and equipment: get the best and cry once.
Re: My Carving Lessons thus far
When things start to feel easy, do something you don't think you can.
Sent from my SM-G930T using Tapatalk
Sent from my SM-G930T using Tapatalk
-
- Posts: 123
- Joined: Tue Jan 16, 2018 8:10 pm
Re: My Carving Lessons thus far
Quietfly wrote:I'm going to take these all to heart!!!
Tonights lesson : Repeated lesson 5. " Always take off a little less rather than a little more = less regret from getting greedy with the sander or turning tools"
... this one take plenty of practice. Nailed a good draft hole and chamber and then while turning the bowl I managed to end up just practicing trimming way too much wood.
my mouth is the marketing department for the circus in my head