Canadian
Posted: Sat Jul 29, 2017 8:59 am
This is another PITH work. I think the shank is not dead straight and has a bit too much taper, but am reluctant to chase it down because I am near the limit on the amount of briar around the mortise.
Length 6.5"
Bowl height 2"
Chamber 0.75 x 1.75 "
1/4" Delrin tenon in black/tan Cumberland
DocAitch
Length 6.5"
Bowl height 2"
Chamber 0.75 x 1.75 "
1/4" Delrin tenon in black/tan Cumberland
DocAitch