Hi
Question just bought a pipe at a small antique store and the steam screws on a threaded piece. It has been over tightened in the past because it doesn't line up when turned till not loose is there anything I can do to fix this problem
Hope I explained to ok
Thank you
David
Steam over tightened
Re: Steam over tightened
Howdy,
Often there is some shrinkage in old stems etc. that causes the threaded ones not to line up anymore. The easiest way to deal with the problem is probably to fashion a thin spacer to go between the stem and the shank. The spacer will take up the room left by the shrinkage. Even a sliver of paper between the stem and the shank of the stummel will work if you only want a quick and dirty fix.
Often there is some shrinkage in old stems etc. that causes the threaded ones not to line up anymore. The easiest way to deal with the problem is probably to fashion a thin spacer to go between the stem and the shank. The spacer will take up the room left by the shrinkage. Even a sliver of paper between the stem and the shank of the stummel will work if you only want a quick and dirty fix.
Re: Steam over tightened
Thank you
Will try that again thank you for the help
Will try that again thank you for the help
Re: Steam over tightened
I use spacers to correct the problem as described with success.
Sent from my HTC0P3P7 using Tapatalk
Sent from my HTC0P3P7 using Tapatalk