Ryobi Bandsaw...
Ryobi Bandsaw...
I know more power is typically better (in most things) but given my budget, do you guys think this bandsaw would do the job for cutting briar blocks? Thanks for your help guys.
Ryobi 2.5 amp, 9 inch throat/3 1/2 cutting capacity
Ryobi 2.5 amp, 9 inch throat/3 1/2 cutting capacity
"No reserves, no retreats, no regrets"
"When you're dumb...you've got to be tough." - my dad
"When you're dumb...you've got to be tough." - my dad
Re: Ryobi Bandsaw...
I'm no expert on bandsaws. Mine is a crappy one.
Re: Ryobi Bandsaw...
I bought a Ryobi bench grinder and it is probably not the greatest one around. I am also on a super budget too. The bench grinder lacks power and can heat up pretty quickly. I also put my buffing wheels on it when I buff. If we had more money, I am sure that we could invest in some decent tools. On the plus side, it still hasn't broke!
Kiel
Kiel
Re: Ryobi Bandsaw...
I have something similar in size and power and it is iffy with briar blocks. If the blade is good and sharp and everything is tuned and aligned it does ok but if the blade is the least bit dull it gets bogged down and can take forever to cut a block. It will work, just not wonderfully.
Re: Ryobi Bandsaw...
Not sure how much the Ryobi is, but this is what I have and it is awesomeness.
https://www.grizzly.com/products/14-1-H ... es-/G0555P
https://www.grizzly.com/products/14-1-H ... es-/G0555P
- sandahlpipe
- Posts: 2106
- Joined: Mon Feb 04, 2013 8:49 pm
- Location: Zimmerman, MN
- Contact:
Re: Ryobi Bandsaw...
I just got a used craftsman band saw off craigslist for $100. The thing is 35 years old and runs great.
Re: Ryobi Bandsaw...
Nate, I would like to borrow golden egg laying goose sometime please sir.
"No reserves, no retreats, no regrets"
"When you're dumb...you've got to be tough." - my dad
"When you're dumb...you've got to be tough." - my dad
Re: Ryobi Bandsaw...
When you find one, shoot me some eggs.JMG wrote:Nate, I would like to borrow golden egg laying goose sometime please sir.
Was suggesting one I knew would work. Hitachi, Ryobi, etc.; a lot of these brands are not exactly known for quality. I would go for Jeremiah's idea, looking on craigslist or ebay for Craftsman or some quality brands
- oklahoma red
- Posts: 1084
- Joined: Tue Apr 12, 2011 6:14 pm
Re: Ryobi Bandsaw...
About a year ago I caught a 14" Craftsman on sale and have not regretted it. 1 HP, dual speed, 2 dust ports and ball bearing guides. Obviously Chinese (what isn't) but well made and fairly heavy.
In 14" saws I would put Nate's Grizzly at the top of the pile but the Craftsman is no slouch. Due to its shape I would guess that Rikon makes it for Sears.
Watch the internet sites for some good old American iron such as Powermatic or perhaps the Canadian-made General. They are not difficult to re-build if needed. They may take some strong backs and weak minds to move but are worth it if one can find one.
Quality blades can make a big difference no matter what the brand.
In 14" saws I would put Nate's Grizzly at the top of the pile but the Craftsman is no slouch. Due to its shape I would guess that Rikon makes it for Sears.
Watch the internet sites for some good old American iron such as Powermatic or perhaps the Canadian-made General. They are not difficult to re-build if needed. They may take some strong backs and weak minds to move but are worth it if one can find one.
Quality blades can make a big difference no matter what the brand.
-
- Posts: 1056
- Joined: Mon Jan 07, 2013 6:25 pm
Re: Ryobi Bandsaw...
Bigger is better , but to answer Yes, that or harbor frt. Buy new blades of quality on ebay and it will make it till you can find a decent one on Craigs list etc. The one Nate has is really great!!!. He gets all the good stuff. The Ryobi and harbor look the same, just cheaper at harbor frt.
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: Ryobi Bandsaw...
This is what I have:
http://www.sears.com/craftsman-1-3-hp-3 ... ockType=G2
I would not trust it to square a block 100% evenly(I have a Rikon 12" disk sander for that) but it is more than adequate for rough cutting, and a decent all around bandsaw.
http://www.sears.com/craftsman-1-3-hp-3 ... ockType=G2
I would not trust it to square a block 100% evenly(I have a Rikon 12" disk sander for that) but it is more than adequate for rough cutting, and a decent all around bandsaw.
- Joe Hinkle Pipes
- Posts: 804
- Joined: Tue Feb 15, 2011 1:39 am
- Location: Lafayette Indiana
- Contact:
Re: Ryobi Bandsaw...
Most of the craftsman bench tools are made by rikon. I have the same craftsman 10" bandsaw and its only good for cutting fingers. It cant cut a curve in a briar block without stalling.
Re: Ryobi Bandsaw...
I'm no expert on band saws but I do know that the proper blade will make a world of difference.
For rough cutting Briar blocks you want 3-4 teeth per inch and a good quality blade.
Check out this one: http://www.woodcraft.com/Product/829912 ... -Claw.aspx
Todd
For rough cutting Briar blocks you want 3-4 teeth per inch and a good quality blade.
Check out this one: http://www.woodcraft.com/Product/829912 ... -Claw.aspx
Todd
Re: Ryobi Bandsaw...
For a small saw, the Ryobi isn't bad. I've got one. Without checking exact models, make sure that the blade guides are ball-bearings rather than blocks. This is usually an indicator that the saw is maybe not total garbage.
The right blade is totally important. I went to kind of a thin blade, thinking I could scroll easier, and it sucked bad. I have a fairly aggressive (5tpi?) 3/8" blade in there now and it works fine.
Bandsaws, like everything else, depend greatly on setup.
The right blade is totally important. I went to kind of a thin blade, thinking I could scroll easier, and it sucked bad. I have a fairly aggressive (5tpi?) 3/8" blade in there now and it works fine.
Bandsaws, like everything else, depend greatly on setup.
ALL YOUR PIPE ARE BELONG TO US!
Re: Ryobi Bandsaw...
I have a craftsman band saw. It's been great. Screams a bit when under load, but has never bound up on me. Snatched plenty of blocks and nearly took off a digit, but never stalled.
andrew
andrew
Andrew
www.andrewstaplespipes.com
www.andrewstaplespipes.com
Re: Ryobi Bandsaw...
Second on the right blade. Buy a good one (and the right one).
andrew
andrew
Andrew
www.andrewstaplespipes.com
www.andrewstaplespipes.com