High spot marking, a la Prussian Blue for machine parts
-
- Posts: 3121
- Joined: Sun Sep 02, 2007 4:29 am
- Location: Kansas City, USA
- Contact:
High spot marking, a la Prussian Blue for machine parts
What do you guys use?
I've messed with several types over the years---mostly for finding the stem shoulder's contact spots on a shank face---and have gotten by, but am always looking for the Perfect Stuff.
I've messed with several types over the years---mostly for finding the stem shoulder's contact spots on a shank face---and have gotten by, but am always looking for the Perfect Stuff.
UFOs must be real. There's no other explanation for cats.
Re: High spot marking, a la Prussian Blue for machine parts
I just use a soft pencil.
ALL YOUR PIPE ARE BELONG TO US!
- wisemanpipes
- Posts: 528
- Joined: Wed Jan 16, 2013 12:11 pm
- Location: Guelph, Ontario
Re: High spot marking, a la Prussian Blue for machine parts
I don't know what you guys are talking about.
Rad
Rad
- Tyler
- Site Supporter
- Posts: 2376
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Farmersville, TX
- Contact:
Re: High spot marking, a la Prussian Blue for machine parts
Me too.RadDavis wrote:I don't know what you guys are talking about.
Rad
Tyler Lane Pipes
http://www.tylerlanepipes.com
http://www.tylerlanepipes.com
- wisemanpipes
- Posts: 528
- Joined: Wed Jan 16, 2013 12:11 pm
- Location: Guelph, Ontario
Re: High spot marking, a la Prussian Blue for machine parts
I thought this was about finding high spots on a shank face??Tyler wrote:Me too.RadDavis wrote:I don't know what you guys are talking about.
Rad
is it George...?
-
- Posts: 3121
- Joined: Sun Sep 02, 2007 4:29 am
- Location: Kansas City, USA
- Contact:
Re: High spot marking, a la Prussian Blue for machine parts
Yes.wisemanpipes wrote: I thought this was about finding high spots on a shank face??
is it George...?
UFOs must be real. There's no other explanation for cats.
Re: High spot marking, a la Prussian Blue for machine parts
I still don't know.
Rad
![Razz :P](./images/smilies/icon_razz.gif)
Rad
Re: High spot marking, a la Prussian Blue for machine parts
I cut them correctly to start with... Bwahahaha!!! ![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
-
- Posts: 3121
- Joined: Sun Sep 02, 2007 4:29 am
- Location: Kansas City, USA
- Contact:
Re: High spot marking, a la Prussian Blue for machine parts
Me too. But... hold on a sec... you know I'm a pipe fixer, and not a pipe maker, right? As in, sometimes I get sent Huber's, Askwith's, or Tyler's stuff.Nate wrote:I cut them correctly to start with... Bwahahaha!!!
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
UFOs must be real. There's no other explanation for cats.
Re: High spot marking, a la Prussian Blue for machine parts
Oh no he did-int!LatakiaLover wrote:As in, sometimes I get sent Huber's, Askwith's, or Tyler's stuff.
andrew
Andrew
www.andrewstaplespipes.com
www.andrewstaplespipes.com
- Tyler
- Site Supporter
- Posts: 2376
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Farmersville, TX
- Contact:
Re: High spot marking, a la Prussian Blue for machine parts
I still don't understand.
And if someone is sending you something I made to get tweaked, they're doing it wrong. I'm not dead. I'll take care of them.
And if someone is sending you something I made to get tweaked, they're doing it wrong. I'm not dead. I'll take care of them.
Tyler Lane Pipes
http://www.tylerlanepipes.com
http://www.tylerlanepipes.com
-
- Posts: 1346
- Joined: Tue Jan 10, 2012 4:55 pm
- Contact:
Re: High spot marking, a la Prussian Blue for machine parts
You're getting close aren't you?!Tyler wrote:I'm not dead. I'll take care of them.
Re: High spot marking, a la Prussian Blue for machine parts
Tyler wrote:I still don't understand.
And if someone is sending you something I made to get tweaked, they're doing it wrong. I'm not dead. I'll take care of them.
Perhaps they want it fixed by someone who knows what they're doing, Tyler.
![Two Thumbs Up :thumbsup:](./images/smilies/2thumbs.gif)
ALL YOUR PIPE ARE BELONG TO US!
Re: High spot marking, a la Prussian Blue for machine parts
Restoration guys in another field use artist's chalk (very fine grain size & high lanolin content for good surface adhesion).
But, of course, they aren't pipe makers !![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
But, of course, they aren't pipe makers !
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Last edited by Yak on Fri Mar 07, 2014 12:30 am, edited 1 time in total.
- Tyler
- Site Supporter
- Posts: 2376
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Farmersville, TX
- Contact:
Re: High spot marking, a la Prussian Blue for machine parts
Closer than I was yesterday.The Smoking Yeti wrote:You're getting close aren't you?!Tyler wrote:I'm not dead. I'll take care of them.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Tyler Lane Pipes
http://www.tylerlanepipes.com
http://www.tylerlanepipes.com
-
- Posts: 3121
- Joined: Sun Sep 02, 2007 4:29 am
- Location: Kansas City, USA
- Contact:
Re: High spot marking, a la Prussian Blue for machine parts
No worries, Tyler. It doesn't happen all that often. I've only been sent a couple hundred of yours. And only for small, picky stuff... like forgetting to drill the airway, the bowl falling off, the finish getting all gummy-melty, that sort of thing. Don't sweat it.Tyler wrote:
And if someone is sending you something I made to get tweaked, they're doing it wrong. I'm not dead. I'll take care of them.
UFOs must be real. There's no other explanation for cats.
Re: High spot marking, a la Prussian Blue for machine parts
LatakiaLover wrote:No worries, Tyler. It doesn't happen all that often. I've only been sent a couple hundred of yours. And only for small, picky stuff... like forgetting to drill the airway, the bowl falling off, the finish getting all gummy-melty, that sort of thing. Don't sweat it.Tyler wrote:
And if someone is sending you something I made to get tweaked, they're doing it wrong. I'm not dead. I'll take care of them.
![Smile :)](./images/smilies/icon_smile.gif)
andrew
Andrew
www.andrewstaplespipes.com
www.andrewstaplespipes.com
- Tyler
- Site Supporter
- Posts: 2376
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Farmersville, TX
- Contact:
Re: High spot marking, a la Prussian Blue for machine parts
LatakiaLover wrote:No worries, Tyler. It doesn't happen all that often. I've only been sent a couple hundred of yours. And only for small, picky stuff... like forgetting to drill the airway, the bowl falling off, the finish getting all gummy-melty, that sort of thing. Don't sweat it.Tyler wrote:
And if someone is sending you something I made to get tweaked, they're doing it wrong. I'm not dead. I'll take care of them.
Oh that stuff? Ok. Good.
Tyler Lane Pipes
http://www.tylerlanepipes.com
http://www.tylerlanepipes.com