Good evening my friends,
Here is a pipe i finished today.
Italian Briar. Acrylic Black Stem.
Lenght - 137 mms / 5.39''
Height - 118 mms / 4.63''
Bowl Diameter - 46 mms / 1.81''
Chamber Diameter - 25 mms / 1.02''
Chamber Height - 60 mms / 2.36''
Weight - 90 grams
Please let me know what you think, i would really love to hear your opinions and comments.
Sweet Smokes!
Bruno Robalo
BR13-27 - "Gjallarhorn" Pipe
- wisemanpipes
- Posts: 528
- Joined: Wed Jan 16, 2013 12:11 pm
- Location: Guelph, Ontario
Re: BR13-27 - "Gjallarhorn" Pipe
bruno, shes sweet!
grain and stain is nice.
grain and stain is nice.
- Jthompson1995
- Posts: 186
- Joined: Sat Apr 13, 2013 6:32 am
- Location: Parkville, MD
Re: BR13-27 - "Gjallarhorn" Pipe
Nice, though I wouldn't want to look down quickly whist smoking it, it would end up sticking me in the chest.
Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
-Walter Blodget
-Walter Blodget
-
- Posts: 1346
- Joined: Tue Jan 10, 2012 4:55 pm
- Contact:
Re: BR13-27 - "Gjallarhorn" Pipe
Interesting composition!
It's tough to provide critique to un-orthodox shapes, this pipe is obviously short, which seems to be your desired effect, so no critique there.
However, two things to think about,
-The stem taper seems a bit goofy starting where it does, I feel like it would look better starting right at the briar-acrylic transition, it would feel less contrived that way.
-The stain is actually sanded fairly unevenly. You might try heating the briar next time you stain, and applying a dark coat until it is opaque. Then, you could buff it back evenly, or alternatively move forward with a contrast staining procedure, which has been covered fairly in-depth on other threads.
All in all, good stuff, keep making pipes!!!
Cheers!
Yeti
It's tough to provide critique to un-orthodox shapes, this pipe is obviously short, which seems to be your desired effect, so no critique there.
However, two things to think about,
-The stem taper seems a bit goofy starting where it does, I feel like it would look better starting right at the briar-acrylic transition, it would feel less contrived that way.
-The stain is actually sanded fairly unevenly. You might try heating the briar next time you stain, and applying a dark coat until it is opaque. Then, you could buff it back evenly, or alternatively move forward with a contrast staining procedure, which has been covered fairly in-depth on other threads.
All in all, good stuff, keep making pipes!!!
Cheers!
Yeti
-
- Posts: 1056
- Joined: Mon Jan 07, 2013 6:25 pm
Re: BR13-27 - "Gjallarhorn" Pipe
I can't tell, is that green for base stain? S.Yeti covered the stem. On a unique
pipe, such as this sanding the chamber takes it to a higher level. I like this pipe, Reminds me of some italian pipes of the 1960s I could not afford. Make more.
pipe, such as this sanding the chamber takes it to a higher level. I like this pipe, Reminds me of some italian pipes of the 1960s I could not afford. Make more.
Re: BR13-27 - "Gjallarhorn" Pipe
Thank you for your words guys!
The base stain is black
pipedreamer wrote:I can't tell, is that green for base stain?
The base stain is black
Re: BR13-27 - "Gjallarhorn" Pipe
I'm no pipe-maker by any stretch of the imagination but, I like it and the only thing I find exceptionally wrong with this pipe is that...........
it's not mine!
it's not mine!
rdpipes.briar.club