Shop Fox M1016 lathe question

Discussions of tools wether you bought them or made them yourself. Anything from screwdrivers to custom chucks and drilling rigs.
Post Reply
randyhoguepipes
Posts: 40
Joined: Thu Feb 24, 2011 5:44 pm
Location: Canton, GA

Shop Fox M1016 lathe question

Post by randyhoguepipes »

Disregard
Last edited by randyhoguepipes on Sun Sep 07, 2014 6:26 pm, edited 1 time in total.
Top
User avatar
DMI
Posts: 421
Joined: Mon Nov 02, 2009 8:48 pm
Location: Northern Ireland

Re: Shop Fox M1016 lathe question

Post by DMI »

Having looked for all of ten seconds, your chuck bolts on to the spindle face with three or four bolts correct?

This type of chuck is common C4 'hobby' lathes for example:

http://www.axminster.co.uk/axminster-si ... rod836541/

http://littlemachineshop.com/products/p ... uctID=2338

http://www.grizzly.com/products/5-4-Jaw ... huck/G9834

So as long as the stud size and spacing is the same any make will do.

David
Top
randyhoguepipes
Posts: 40
Joined: Thu Feb 24, 2011 5:44 pm
Location: Canton, GA

Re: Shop Fox M1016 lathe question

Post by randyhoguepipes »

Disregard
Last edited by randyhoguepipes on Sun Sep 07, 2014 6:27 pm, edited 1 time in total.
Top
caskwith
Posts: 2196
Joined: Sat Dec 08, 2007 6:00 am

Re: Shop Fox M1016 lathe question

Post by caskwith »

Since you have a metal lathe and toold already, just make your own blackplate to fit and then use a front mounting chuck.
Top
Post Reply

Return to “Tools and Tooling”