Pipe #4: Tiger Fish
Pipe #4: Tiger Fish
I finally finished up #4 and here it is. Honestly, I'm not elated by all the details here. There's some stuff I just got stuck on when it came to the stem. There are also some tool marks on the stem still. ARGH! Also, the profile of this pipe is my least favorite angle for it. I'd say every angle except for a direct profile is rather pretty. I'll take some more photos and update this post when I do.
One thing I do have to say: as I'm learning to use my new lathe, it is expediting the process ten fold. I look forward to the day that I actually know what I'm doing!
Despite the imperfections, I learned a huge amount and am glad to have made this pipe! Even if this blowfish failed, I'm glad I went for it.
Well, with all that said, here is the first round of photos. Any and all criticism welcome and encouraged!
Dimensions:
L: 4.5"
W: 1 1/4"
Diam: 18mm
Depth: 20mm
Stem:
3.8mm at the bit, tapering from 5.62mm
Note: Photos updated twice
One thing I do have to say: as I'm learning to use my new lathe, it is expediting the process ten fold. I look forward to the day that I actually know what I'm doing!
Despite the imperfections, I learned a huge amount and am glad to have made this pipe! Even if this blowfish failed, I'm glad I went for it.
Well, with all that said, here is the first round of photos. Any and all criticism welcome and encouraged!
Dimensions:
L: 4.5"
W: 1 1/4"
Diam: 18mm
Depth: 20mm
Stem:
3.8mm at the bit, tapering from 5.62mm
Note: Photos updated twice
Last edited by d.huber on Fri Jul 20, 2012 1:35 pm, edited 2 times in total.
Re: Pipe #4: Tiger Fish
Not bad at all, David. The main suggestion I'd give is to put a bit of a bend in the stem. I can't think of too many bent pipes that don't need some degree of bend in the stem.
Re: Pipe #4: Tiger Fish
I think it would look better if you had maintained more crisp lines. The shape kind of melts together because of the rounded edges. I also think it needs a slight bend. Lastly, I think I might like it better if the stem was 1/4" shorter.
The way to make people want to smoke your pipes is to develop a reputation for excellence in your work. This takes a lot of hard work and several years to accomplish, and there are no short cuts. You just have to keep at it. - Rad Davis
Re: Pipe #4: Tiger Fish
How exciting! Your first pipe on a lathe!
I agree about bending the stem. I like the general shape, you just need to work on refining the details. Great pipe, David.
Now the big question: Do you sell it, give it away, or keep it? Not to pry. Just curious.
I agree about bending the stem. I like the general shape, you just need to work on refining the details. Great pipe, David.
Now the big question: Do you sell it, give it away, or keep it? Not to pry. Just curious.
Re: Pipe #4: Tiger Fish
Thanks, Wayne! I'm relatively happy with the pipe, but I do feel like I'm capable of better.wdteipen wrote:Not bad at all, David. The main suggestion I'd give is to put a bit of a bend in the stem. I can't think of too many bent pipes that don't need some degree of bend in the stem.
Thanks for your thoughts, Cory! Could you be more specific about the lines that are melting together? Hmm... I might see what you mean in the pictures in profile...Cory wrote:I think it would look better if you had maintained more crisp lines. The shape kind of melts together because of the rounded edges. I also think it needs a slight bend. Lastly, I think I might like it better if the stem was 1/4" shorter.
I know, right? I'm loving the lathe and am having a great time learning on it.Ocelot55 wrote:How exciting! Your first pipe on a lathe!
I agree about bending the stem. I like the general shape, you just need to work on refining the details. Great pipe, David.
Sounds like consensus is "bend the stem." I'd been toying with the idea but have resisted. A pipemaker at the Chicago Show saw this in its infant stages and said that sometimes, you just need to let the energy go straight out. I'll go back and give it a bend and see how it looks.
Haven't done anything with it yet! It's still sitting on my desk.Ocelot55 wrote:Now the big question: Do you sell it, give it away, or keep it? Not to pry. Just curious.
Last edited by d.huber on Thu Jul 19, 2012 10:04 am, edited 1 time in total.
Re: Pipe #4: Tiger Fish
BTW, any opinions about the mirror and glove? Too much?
Re: Pipe #4: Tiger Fish
I think it's a great looking pipe! Nice job. Way better than my 4th I'm sure. Keep up the great work.
Brian.
Brian.
Re: Pipe #4: Tiger Fish
My first thought is bend that stem !
Cool looking pipe man, I dont have any other critique to offer.
Cool looking pipe man, I dont have any other critique to offer.
Ryan Alden
http://www.aldenpipes.com
http://www.aldenpipes.com
- HumblePipe
- Posts: 130
- Joined: Sun Mar 06, 2011 12:22 pm
- Location: Ohio
- Contact:
Re: Pipe #4: Tiger Fish
I also agree that the stem would look great with a bend in it.
-
- Posts: 46
- Joined: Tue Aug 23, 2011 12:14 am
- Location: Medford, Oregon
Pipe #4: Tiger Fish
The mirror, due to the reflective coating being on the bottom of the glass, gives a double reflection due to the glass also reflecting the image. If you use only glass you will get a single crisp reflection but somewhat muted. I always stayed away from mirrors when I use to do product photography years ago. My 2 cents...
Not sure I want my hobby to turn into my job largely because I grow to hate my job....
Re: Pipe #4: Tiger Fish
Ah hah! I was wondering why it looked shaky in the reflection. Very helpful, thank you.OregonCustom wrote:The mirror, due to the reflective coating being on the bottom of the glass, gives a double reflection due to the glass also reflecting the image. If you use only glass you will get a single crisp reflection but somewhat muted. I always stayed away from mirrors when I use to do product photography years ago. My 2 cents...
BTW, I bent the stem and updated the photos! What do you guys think?
Re: Pipe #4: Tiger Fish
Its Mo Better.UberHuberMan wrote: What do you guys think?
Ryan Alden
http://www.aldenpipes.com
http://www.aldenpipes.com
Re: Pipe #4: Tiger Fish
David
Nice 4th pipe.. as some have already mentioned..much better than my 4th also... bending the stem transformed the flow a lot
congrats
james
Nice 4th pipe.. as some have already mentioned..much better than my 4th also... bending the stem transformed the flow a lot
congrats
james
Re: Pipe #4: Tiger Fish
Thanks, guys!
I agree. Thanks for the help, everyone!jogilli wrote:... bending the stem transformed the flow a lot
Re: Pipe #4: Tiger Fish
To answer your question more directly, it's sold. I didn't want to count my chickens 'cause this is going to a guy who asked me to make him one after he saw my first in March and he could very easily have changed his mind. However, I received an e-mail from him this morning saying that the check was in the mail.Ocelot55 wrote:Now the big question: Do you sell it, give it away, or keep it? Not to pry. Just curious.
I'm selling it at cost since I'm still in the infant stages of learning and that is apparent in this pipe. It's thrilling, however, to know that someone will get to enjoy it and I'll get to recoup the cost of materials. What fun!
Re: Pipe #4: Tiger Fish
Congratulations on your sale as well! I hope you included the cost of the Chicago seminar in your materials list. Plus a small lathe acquisition surcharge, your PMF dues and a set-aside for the Old Pipemakers' Home.
Now put that check to work and show us some more pipes!
Now put that check to work and show us some more pipes!
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
"Creativity is the residue of time wasted."
Albert Einstein, famous pipe smoker
"Creativity is the residue of time wasted."
Albert Einstein, famous pipe smoker