Hi guys,
I have a bench top lathe with a 5/8" coarse thread and I want to put a jacobs chuck on it.
All I can find at Lowes, Home Depot, etc... are ones that receive what looks to be 1/2" fine thread.
I've looked at all the local haunts and cannot find anything.
Any suggestions on a reducer??
Thanks in advance.
Fitting a jacobs chuck on a lathe
- Timberwolf
- Posts: 42
- Joined: Sun Aug 17, 2008 2:59 pm
- Location: Michigan
- Contact:
Fitting a jacobs chuck on a lathe
"A pipe is the fountain of contemplation, the source of pleasure, the companion of the wise; and the man who smokes, thinks like a philosopher and acts like a Samaritan." -Edward George Bulwer-Lytton, 1st Baron Lytton"
- Timberwolf
- Posts: 42
- Joined: Sun Aug 17, 2008 2:59 pm
- Location: Michigan
- Contact:
Here's the lathe
And it is the drive spindle.
I'm looking to put a jacobs chuck on it for sanding and buffing applications.
Thanks Kurt, if there is another way, I'm all ears.
"A pipe is the fountain of contemplation, the source of pleasure, the companion of the wise; and the man who smokes, thinks like a philosopher and acts like a Samaritan." -Edward George Bulwer-Lytton, 1st Baron Lytton"
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
From the product specs, it looks like the spindle threads are 3/4"-10tpi. That's actually a pretty common spindle size. You *might* be able to find a jacobs chuck threaded to fit that, but the most common sizes for jacobs chuck thread mounts are 1/2"-20 and 3/8"-24.
Without a tapered hole in the spindle, your options are limited. In true tinkerer fashion, I'd just go and make myself a tool. If you have access to a metal lathe, getting a thread adapter made should be fairly trivial as long as you keep the axis uniform. You might even be able to make one from 6061 aluminum just to make life easy.
HOWEVER, given the circumstances, I think that going the tried and true route, with motors equiped with arbors and sanding discs, is going to suit you better. You can also set one up as a buffer as well.
Without a tapered hole in the spindle, your options are limited. In true tinkerer fashion, I'd just go and make myself a tool. If you have access to a metal lathe, getting a thread adapter made should be fairly trivial as long as you keep the axis uniform. You might even be able to make one from 6061 aluminum just to make life easy.
HOWEVER, given the circumstances, I think that going the tried and true route, with motors equiped with arbors and sanding discs, is going to suit you better. You can also set one up as a buffer as well.
I did a little snooping, but I didn't have much luck coming up with a jacobs chuck threaded to 3/4-10.
However, I did come up with a couple things that you might find useful. First, you can buy a 3/4-10 tap on Ebay for around $10.
I doubt you would have much luck trying to tap hardened steel, but you shouldn't have any trouble tapping mild steel, aluminum, etc.
Nor should you have any trouble coming up with two or three useful attachments after a little head-scratching.
Second, just for future reference, this guy can put together a 6-inch 3-jaw scroll chuck or a 6-inch 4-jaw independent chuck, either one with a dozen different adapters -- including one for a 3/4-10 spindle -- for like $50-100.
However, I did come up with a couple things that you might find useful. First, you can buy a 3/4-10 tap on Ebay for around $10.
I doubt you would have much luck trying to tap hardened steel, but you shouldn't have any trouble tapping mild steel, aluminum, etc.
Nor should you have any trouble coming up with two or three useful attachments after a little head-scratching.
Second, just for future reference, this guy can put together a 6-inch 3-jaw scroll chuck or a 6-inch 4-jaw independent chuck, either one with a dozen different adapters -- including one for a 3/4-10 spindle -- for like $50-100.
- Timberwolf
- Posts: 42
- Joined: Sun Aug 17, 2008 2:59 pm
- Location: Michigan
- Contact:
Thanks Pierre!
Some very solid leads there. Appreciate it.
I really like the chuck link from eBay!
Some very solid leads there. Appreciate it.
I really like the chuck link from eBay!
"A pipe is the fountain of contemplation, the source of pleasure, the companion of the wise; and the man who smokes, thinks like a philosopher and acts like a Samaritan." -Edward George Bulwer-Lytton, 1st Baron Lytton"