Here's one for critique. I started out by sketching out what I thought looked kind of prince-like, but wanted it bent. Then somewhere along the line it transformed itself into a pot, but retained the low bottom of a prince. I think I need to print out photos of the shape I'm trying to make and tape them up around my workspace. I don't absolutely dislike the results, but I'm not really satisfied with how the shaping came out.
Anyhow, the buffing on the stem is still uneven--more so than you can see in the photos--and I need to take care of that before this one goes any further.
Churchwarden Pot Prince
- Literaryworkshop
- Posts: 275
- Joined: Thu Feb 28, 2013 3:57 pm
- Location: Alabama Gulf Coast
- Contact:
Churchwarden Pot Prince
- Steve S.
- sandahlpipe
- Posts: 2106
- Joined: Mon Feb 04, 2013 8:49 pm
- Location: Zimmerman, MN
- Contact:
Re: Churchwarden Pot Prince
Part of the reason the shape didn't work out is that the chamber is too wide for you to do much more to the bowl. The stem just needs more sanding in the uneven spots, but I'd recommend using a pillar file to get it flat.
Re: Churchwarden Pot Prince
I want to applaud doing more than a few churchwardens. I look at those stems and my head starts hurting. I have a hard enough time doing a "regular" sized stem.
As far as this pipe goes, I also feel that the chamber is rather large. I think if you did something to the rim other than leaving it flat might help make it look more comfortable. Rounding out the bottom might help too.
What you said about having a picture of the pipe you want to do in front of you would be a good idea. If I remember correctly, this isn't your first fusion pipe. A while back you also made a diamond shanked billiard that didn't really work either. The mantra here - start with classic shapes (billiards) - makes more sense to me after every pipe I finish. I think if you got some classic shapes down really good, then fusing them together would actually be a whole lot easier.
That's all I got.
Kiel
As far as this pipe goes, I also feel that the chamber is rather large. I think if you did something to the rim other than leaving it flat might help make it look more comfortable. Rounding out the bottom might help too.
What you said about having a picture of the pipe you want to do in front of you would be a good idea. If I remember correctly, this isn't your first fusion pipe. A while back you also made a diamond shanked billiard that didn't really work either. The mantra here - start with classic shapes (billiards) - makes more sense to me after every pipe I finish. I think if you got some classic shapes down really good, then fusing them together would actually be a whole lot easier.
That's all I got.
Kiel
- Literaryworkshop
- Posts: 275
- Joined: Thu Feb 28, 2013 3:57 pm
- Location: Alabama Gulf Coast
- Contact:
Re: Churchwarden Pot Prince
The stem is a premold, so it's really pretty easy, apart from getting it all buffed out evenly. It's not like I'm trying to drill eleven inches of solid rod.
Anyhow, thanks for the pointers.
Anyhow, thanks for the pointers.
- Steve S.
- sandahlpipe
- Posts: 2106
- Joined: Mon Feb 04, 2013 8:49 pm
- Location: Zimmerman, MN
- Contact:
Re: Churchwarden Pot Prince
This is a good point. Start with an idea of what you're going to make and make exactly what you plan on making. Pipe making shouldn't be like the shooting gallery at a fair where you get whatever you hit. Take aim at a specific target. Only then will you be able to measure your success. Recovering from mistakes almost always looks like a mistake.kamkiel wrote: What you said about having a picture of the pipe you want to do in front of you would be a good idea. If I remember correctly, this isn't your first fusion pipe. A while back you also made a diamond shanked billiard that didn't really work either. The mantra here - start with classic shapes (billiards) - makes more sense to me after every pipe I finish. I think if you got some classic shapes down really good, then fusing them together would actually be a whole lot easier.