Page 1 of 1
Back to the drawing board.
Posted: Sat May 07, 2016 1:20 pm
by timberwolfer21
After spending a butt load of time in your archives, it became painfully apparent that my nearly finished pipe wasn't as near as I thought.
Stem thickness adjustments and stummel transitions currently under way.
I gathered from my research that the search function was the topic of many threads, but I must say it has answered all my questions so far without fail.
Lesson learned? Do your homework first, then attack...
Will post again when finished.
Sent from my iPhone using Tapatalk
Re: Back to the drawing board.
Posted: Sat May 07, 2016 2:51 pm
by Sasquatch
Dear Timberwolf,
Your pipe is upside down!
Hope this helps
Todd
Re: Back to the drawing board.
Posted: Sat May 07, 2016 3:01 pm
by baweaverpipes
Dear Timberwolf,
Perfect focus on the wall outlet.
You need to zip tie the other side.
I know this helps,
BAW
Re: Back to the drawing board.
Posted: Sat May 07, 2016 3:29 pm
by LatakiaLover
Dear Timberwolf,
Cigar bands are terrible tools.
If this helps, you're in worse shape than you thought.
George
Re: Back to the drawing board.
Posted: Sat May 07, 2016 3:56 pm
by timberwolfer21
Sasquatch wrote:Dear Timberwolf,
Your pipe is upside down!
Hope this helps
Todd
Dear Sasquatch,
No, it doesn't...
Re: Back to the drawing board.
Posted: Sat May 07, 2016 3:58 pm
by timberwolfer21
baweaverpipes wrote:Dear Timberwolf,
Perfect focus on the wall outlet.
You need to zip tie the other side.
I know this helps,
BAW
Dear baweaverpipes,
Times are tough, need to conserve...
Re: Back to the drawing board.
Posted: Sat May 07, 2016 4:02 pm
by timberwolfer21
LatakiaLover wrote:Dear Timberwolf,
Cigar bands are terrible tools.
If this helps, you're in worse shape than you thought.
George
Dear LatakiaLover,
Duly noted.
The "help" is about what I expected.
Re: Back to the drawing board.
Posted: Sat May 07, 2016 4:25 pm
by Sasquatch
You're welcome, that's what we're here for!
Re: Back to the drawing board.
Posted: Tue May 10, 2016 7:55 am
by Charl
