Page 1 of 1

Another Frankenpipe- if you don't want to see a "shop Pipe",

Posted: Wed Jan 06, 2016 4:23 pm
by DocAitch
Another Frankenpipe. Again, I delved into my box of discards from years ago and came up with a potentially beautiful bowl that had a messed up shank. This time I had tried to drill a vent hole at too steep an angle, went in too high on the chamber, and because of the acute angle, had an elongated entry into the chamber.
Image
My task was to re enter the bowl to take out the elongated draft hole and still leave enough briar in the area to shape.
Image
After drilling with 5/16"pilot and counterbore with beveled mortise.The larger hole on the left is the entry into the chamber
Image
Piece of scrap briar turned and fitted to the bowl.
Image
Stem piece be sanded to fit bottom of chamber. If I ever do this again, I will turn the briar tenon longer and carefully fit it to bowl. As it is, there is a small void between the end of the tenon and the bowl. I could use a coating to cover this, but this pipe is unlikely to be smoked because my son wants it and he doesn"t smoke.
ImageImage
Image
Image
DocAitch

Re: Another Frankenpipe- if you don't want to see a "shop Pi

Posted: Fri Dec 16, 2016 11:51 pm
by CondorPipes
WOW Doc that is one hell of a pipe resurrection. Beautiful shop pipe!

Re: Another Frankenpipe- if you don't want to see a "shop Pi

Posted: Sat Dec 17, 2016 12:19 am
by DocAitch
Thanks. I was surprised to see this come up after almost a year. I had been working with 40 yo scraps and odds and sods after setting up my lathe and drill press. It was a fun exercise to get my hand back in.
I have since gotten some new briar from various sources and started cutting stems from rod.
DocAitch

Re: Another Frankenpipe- if you don't want to see a "shop Pi

Posted: Sun Dec 18, 2016 12:56 pm
by CondorPipes
DocAitch wrote:Thanks. I was surprised to see this come up after almost a year. I had been working with 40 yo scraps and odds and sods after setting up my lathe and drill press. It was a fun exercise to get my hand back in.
I have since gotten some new briar from various sources and started cutting stems from rod?
DocAitch
Doc I just came across your pics. Being new to the forum I guess I'm making all kinds of "new" discoveries LOL. Just thought it was cool that you made something out if it other then firewood.