round glass bead vs. sharp glass bead?

Discussions of tools wether you bought them or made them yourself. Anything from screwdrivers to custom chucks and drilling rigs.
Post Reply
User avatar
PremalChheda
Posts: 1213
Joined: Sat Dec 11, 2010 6:03 pm
Location: Columbus, Ohio, USA
Contact:

round glass bead vs. sharp glass bead?

Post by PremalChheda »

Most of us are using the round glass bead. Does anyone have any experience using the sharp glass bead and a comparison to the round?
Premal Chheda
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
User avatar
Sasquatch
Posts: 5147
Joined: Tue Jan 13, 2009 1:46 am

Re: round glass bead vs. sharp glass bead?

Post by Sasquatch »

I have no idea what I have. I suspect I may have just filtered/sized ground glass rather than "bead".
ALL YOUR PIPE ARE BELONG TO US!
User avatar
oklahoma red
Posts: 1084
Joined: Tue Apr 12, 2011 6:14 pm

Re: round glass bead vs. sharp glass bead?

Post by oklahoma red »

Sharp glass "bead" is a bit of a misnomer. Glass beads are just that, glass that has been processed to form a smooth spherical "bead". Ground glass is everyday glass that has been recycled by grinding it down into fine particles of varying sizes. It is much more aggressive (similar to AO or silicon carbide) than beads and breaks down faster which would cause one to be constantly cleaning and recharging the blast cabinet. Normally it is not used in cabinets but rather as a one-shot media in a pressure pot and utilized outside or in a large blast room for industrial cleaning.
I have no personal experience in using it to blast briar. It is cheap, however.
I have used a mix of AO and glass beads with success.
User avatar
PremalChheda
Posts: 1213
Joined: Sat Dec 11, 2010 6:03 pm
Location: Columbus, Ohio, USA
Contact:

Re: round glass bead vs. sharp glass bead?

Post by PremalChheda »

oklahoma red wrote:Sharp glass "bead" is a bit of a misnomer. Glass beads are just that, glass that has been processed to form a smooth spherical "bead". Ground glass is everyday glass that has been recycled by grinding it down into fine particles of varying sizes. It is much more aggressive (similar to AO or silicon carbide) than beads and breaks down faster which would cause one to be constantly cleaning and recharging the blast cabinet. Normally it is not used in cabinets but rather as a one-shot media in a pressure pot and utilized outside or in a large blast room for industrial cleaning.
I have no personal experience in using it to blast briar. It is cheap, however.
I have used a mix of AO and glass beads with success.
It's $10 for 50 lbs so one time use may end up being close to or a little more than the beads that can be recycled a few times. I'm curious as to the performance. AO is way too aggressive and will not really make a better blast, just faster.
Premal Chheda
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
User avatar
oklahoma red
Posts: 1084
Joined: Tue Apr 12, 2011 6:14 pm

Re: round glass bead vs. sharp glass bead?

Post by oklahoma red »

I guess the question I would ask is exactly what are you looking for inre the final result of the blast?
And, on second thought, one might see life of the media beyond one pass since briar is not as hard as a lot of surfaces that ground glass is used upon.
To coin a unique acronym: TIAFO :lol:
scotties22
Posts: 1767
Joined: Mon Jun 11, 2012 9:43 pm
Location: Missouri
Contact:

Re: round glass bead vs. sharp glass bead?

Post by scotties22 »

For $10 I'd give it a go. I've spent far more money on a lot dummer stuff. I do agree that I don't see it breaking down quite as fast on briar as it would on metal.
Am I Calamity Jane or Annie Oakley??...depends on the day.
www.ladybriar.com
pipeguy
Posts: 459
Joined: Thu Sep 03, 2009 5:56 pm
Location: Warren R.I.
Contact:

Re: round glass bead vs. sharp glass bead?

Post by pipeguy »

I've used it, like Red said its more of an outside media. I could blast mabey three pipes
With 3 16oz. Cups in the hopper with fairly the same result as round bead but round bead lasts
Longer FWIW :?
"I never knew how empty was my soul untill it was filled" Arthur
http://www.clarkpipes.com
E.L.Cooley
Posts: 363
Joined: Thu Feb 13, 2014 3:36 pm
Location: Colorado Springs, Co

Re: round glass bead vs. sharp glass bead?

Post by E.L.Cooley »

Hey all, can someone recommend a good bead and where I might find it. I have had a cabinet for almost a year. But the pipe I am working on now is asking to be blasted so I need to get it set up.


Sent from my iPhone using Tapatalk
scotties22
Posts: 1767
Joined: Mon Jun 11, 2012 9:43 pm
Location: Missouri
Contact:

Re: round glass bead vs. sharp glass bead?

Post by scotties22 »

I get mine from a local rock house (Sturgis Materials, Inc). They have quite a few different media types and sizes. Look for someone around Laramie that sells to companies that do industrial painting or like I did and find a landscape/countertop rock yard that sells it. More than likely they will have what you need (extra fine glass bead, though I don't remember the sieve size).
Am I Calamity Jane or Annie Oakley??...depends on the day.
www.ladybriar.com
scotties22
Posts: 1767
Joined: Mon Jun 11, 2012 9:43 pm
Location: Missouri
Contact:

Re: round glass bead vs. sharp glass bead?

Post by scotties22 »

If you want to get expensive with it Grainger sells as well. They are a lot more expensive than what I pay at Sturgis, like a 50lb bag for $35
Am I Calamity Jane or Annie Oakley??...depends on the day.
www.ladybriar.com
E.L.Cooley
Posts: 363
Joined: Thu Feb 13, 2014 3:36 pm
Location: Colorado Springs, Co

Re: round glass bead vs. sharp glass bead?

Post by E.L.Cooley »

Thanks Scottie. I will look around. I guess I'd better update my location. Left Laramie a few years ago, lived in San Francisco, now in southern Colorado. I get around. [FACE WITH STUCK-OUT TONGUE AND WINKING EYE]thanks again


Sent from my iPhone using Tapatalk
Post Reply