Oval Shank Billiard - reworked

Want to show you work to the world? Want a place to post photos of your work and solicit the opinions of those that have gone before you? Post your work here.
Post Reply
pmbattles
Posts: 54
Joined: Tue Jan 03, 2017 5:23 pm

Oval Shank Billiard - reworked

Post by pmbattles »

So I posted this pipe last week, and after some great critiques I decided to go back to work on it. I tried to fix 3 major things; removing some more from the chin, setting the rim straight, and making the back of the bowl match the front. I didn't do any work to the stem, sorry. Critiques are always appreciated.
Attachments
IMG_2561.jpg
IMG_2561.jpg (210.21 KiB) Viewed 1419 times
IMG_2560.jpg
IMG_2560.jpg (209 KiB) Viewed 1419 times
IMG_2565.jpg
(215.67 KiB) Downloaded 13 times
IMG_2563 (1).jpg
(40.19 KiB) Downloaded 13 times
IMG_2588.jpg
(243.92 KiB) Downloaded 13 times
User avatar
sandahlpipe
Posts: 2106
Joined: Mon Feb 04, 2013 8:49 pm
Location: Zimmerman, MN
Contact:

Re: Oval Shank Billiard - reworked

Post by sandahlpipe »

The chin is still there. And the sides of the bowl aren't the same on the bottom third of the bowl. When viewed from the bottom, the right cheek is bigger than the left.
---
Fail early, fail often. Your success depends on it.

Jeremiah Sandahl
http://sandahlpipe.com
DocAitch
Posts: 1109
Joined: Mon Dec 14, 2015 12:44 am
Location: Baltimore, Maryland

Re: Oval Shank Billiard - reworked

Post by DocAitch »

Again, this will improve with your next efforts.
Occasionally, I use a contour gauge (a linear array of moveable pins that take on the contour when pressed against an object) to compare side to side when I am filing. About $8 at Home Depot.
Nice smokable pipe.
You are getting there.
DocAitch
"Hettinger, if you stamp 'hand made' on a dog turd, some one will buy it."
-Charles Hollyday, pipe maker, reluctant mentor, and curmudgeon
" Never show an idiot an unfinished pipe!"- same guy
Post Reply