Adventures in Bamboo: Dublinish Rocker Freehand

Want to show you work to the world? Want a place to post photos of your work and solicit the opinions of those that have gone before you? Post your work here.
Post Reply
DocAitch
Posts: 1109
Joined: Mon Dec 14, 2015 12:44 am
Location: Baltimore, Maryland

Adventures in Bamboo: Dublinish Rocker Freehand

Post by DocAitch »

This my other more successful bamboo efforts. Subject to the same critique-too long shank length, not a great polish on the spacers etc. This pipe also has two stems. (Actually 4, I am debating giving all 4 to the recipient).
Image
Image
Image
Image
Image
The bamboo extension rotated a bit while being glued
Image
Image
Image
Green stem, too short, not enough bend.
Fire away
DocAitch
"Hettinger, if you stamp 'hand made' on a dog turd, some one will buy it."
-Charles Hollyday, pipe maker, reluctant mentor, and curmudgeon
" Never show an idiot an unfinished pipe!"- same guy
wdteipen
Posts: 2817
Joined: Sat Mar 29, 2008 1:05 pm

Re: Adventures in Bamboo: Dublinish Rocker Freehand

Post by wdteipen »

The first stem shown is the better of the two for sure although it may be a touch wide. I've found that 3/4" bit width is max for comfort. I made this mistake a lot early on. The second stem is a mess really. I wouldn't send it out without slimming it down a bunch. I honestly wouldn't think it worth the effort unless you just want the practice.
Wayne Teipen
Teipen Handmade Briar Pipes
http://www.teipenpipes.com
DocAitch
Posts: 1109
Joined: Mon Dec 14, 2015 12:44 am
Location: Baltimore, Maryland

Re: Adventures in Bamboo: Dublinish Rocker Freehand

Post by DocAitch »

wdteipen wrote: I wouldn't send it out without slimming it down a bunch. I honestly wouldn't think it worth the effort unless you just want the practice.
I like the first stem as well. When you say "slimming it down a lot" are you referring to the thickness/lumpy curve on the flare?
I agree that that could use some slimming.
My thought is that it can't hurt to have a second stem around, especially a green one with St.Paddy's day approaching :D
DocAitch
"Hettinger, if you stamp 'hand made' on a dog turd, some one will buy it."
-Charles Hollyday, pipe maker, reluctant mentor, and curmudgeon
" Never show an idiot an unfinished pipe!"- same guy
wdteipen
Posts: 2817
Joined: Sat Mar 29, 2008 1:05 pm

Re: Adventures in Bamboo: Dublinish Rocker Freehand

Post by wdteipen »

DocAitch wrote:
wdteipen wrote: I wouldn't send it out without slimming it down a bunch. I honestly wouldn't think it worth the effort unless you just want the practice.
I like the first stem as well. When you say "slimming it down a lot" are you referring to the thickness/lumpy curve on the flare?
I agree that that could use some slimming.
My thought is that it can't hurt to have a second stem around, especially a green one with St.Paddy's day approaching :D
DocAitch
Everything about the second stem is a bit clunky. The gap between the end of the shank and the flare is too long. The profile thickness looks too thick and the button can use a lot of trimming. The lines coming off of the flare aren't symmetrical.
Wayne Teipen
Teipen Handmade Briar Pipes
http://www.teipenpipes.com
DocAitch
Posts: 1109
Joined: Mon Dec 14, 2015 12:44 am
Location: Baltimore, Maryland

Re: Adventures in Bamboo: Dublinish Rocker Freehand

Post by DocAitch »

Thanks. I wasn't happy it, it was the first one I cut for that pipe. My main concern was that it was too short.
That's why I cut the black one.
I did just measure the width of the black one and it is about a 11/16" wide.
DocAitch
"Hettinger, if you stamp 'hand made' on a dog turd, some one will buy it."
-Charles Hollyday, pipe maker, reluctant mentor, and curmudgeon
" Never show an idiot an unfinished pipe!"- same guy
Post Reply