pipemakersforum.com

When you buff clear CA, it is going to make it noticeable, and you need to use some clamping pressure. You need to use CA that is tinted. Some people have their own way of tinting CA, but most of those methods are hit and miss to say the least. Since you can buy it already tinted for not a whole lot...

If you have any problems, drop me a line and I will be glad to help out however I can

Wes
rebuiltbriars.com

First, clean the area very well. You want it clean and as free from oxidation as possible. Most people but a pipe cleaner, with a thin coat of olive oil or the like on it, inserted into the opening of the stem and then start the glue up process. For more details check out this article at rebornpipes...

I am sure you could make a SS insert/tube for the pipe and it might work just fine for you. He are a couple of things to consider. I have found that a long SS insert can actually cause additional condensation in the stem of a pipe. If the stem is lined with SS, the condensation that does form has no...

I would like to say that I like to use 1750 RPM on a 8" buffing wheel. Google the Beal Wood Polishing System and I think you will be happy with the results you see. There are several youtube videos on using it as well. Some people like to use very high speeds and a light touch while other use a...

It is hard to say without looking at the actual pipe, but I agree with Pipedreamer. Your best option is to make a insert to completely block the channel and then re drill. This can be a little tricky. Go slow

Wes Keenan
Rebuilt Briars
http://www.rebuiltbriars.com

I too have used this technique and agree with Wayne about the issues you can face. I have started using IC-2000 which is a CA (super glue) adhesive with rubber mixed in that is available at most hobby stores. I mix it 1/2 and 1/2 with extra think gap filling CA and then apply to the stem and wait fo...